STM32F446ZE NUCLEO BOARD PINOUT SOFTWARE

The STM32 Nucleo-144 board does not require any separate probe, as it integrates the ST-LINK/V2-1 debugger/programmer and it comes with the STM32 comprehensive software HAL library, together with various packaged software examples, as well as a direct access to the ARM®mbed™online resources. The ST Zio connector, which is an extension of Arduino™ Uno, provides access to more peripherals and ST morpho headers make it easy to expand the functionality of the Nucleo open development platform with a wide choice of specialized shields. mbed-dev library in STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features.ARMmbed/mbed-os repository on GitHub ( up-to-date version, used with mbed CLI commands).

You can find more details on the available pins and labels in the PeripheralPins.c and PinNames.h files. LSE crystal: 32.768 KHz crystal oscillator.USB OTG or full-speed device with Micro-AB connector (depending on STM32 support).External power sources: 3.3 V and 7 - 12 V on ST Zio or ST morpho connectors, 5 V on ST morpho connector.Mass storage (USB Disk drive) for drag'n'drop programming.Three different interfaces supported on USB: Selection-mode switch to use the kit as a standalone ST-LINK/V2-1.On-board ST-LINK/V2-1 debugger/programmer with SWD connector:.

STM32F446ZE NUCLEO BOARD PINOUT FULL

ST morpho extension pin header footprints for full access to all STM32 I/Os.

ST Zio connector including: support for Arduino™ Uno V3 connectivity (A0 to A5, D0 to D15) and additional signals exposing a wide range of peripherals.

RTC: subsecond accuracy, hardware calendar.

8- to 14-bit parallel camera interface up to 54 Mbytes/s.

USB 2.0 full-speed device/host/OTG controller with on-chip PHY.

Up to 4 × I2 C interfaces (SMBus/PMBus).

VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM.

Low power: Sleep, Stop and Standby modes.

32 kHz oscillator for RTC with calibration.

1.7 V to 3.6 V application supply and I/Os.

LCD parallel interface, 8080/6800 modes.

ARM®32-bit Cortex®-M4 + FPU + Chrom-ART™ Accelerator.

The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features.

Stm32f446ze nucleo board pinout